rdz_ttgo_sonde
rdz_ttgo_sonde copied to clipboard
dl9rdz
Would it be possible to add the lat/lon/altitude fields of the receiver to the ChaseMapper JSON output? The receiver has a GPS receiver and the data should be available on...
Is there some way to make the IP address static when the Lora board attaches to a host?
**Describe the bug** The SX1268 does not turn on. The serial output shows that communication with the chip does not occur, as the frequency setting nor gain settings at startup...
Is there a way to give the option to select metric or imperial units in the setup? Thank you!!! Ernie
Basic idea behind this is that sondes that are high enough, aren't really that interesting in terms of hunting. A good station can "hang" to sonde that is "useless to...
New T-Beam V1.2 has replaced PMU There is no AXP192 but AXP2101 Please add support for that chip, probably migration to [XPowersLib](https://github.com/lewisxhe/XPowersLib) is needed. https://github.com/dl9rdz/rdz_ttgo_sonde/pull/379
The order of received data change randomly on the Data page every 5 seconds when the page is refreshed. If it is sorted by latest received data or same order...
Hello, I recently dug a little deeper into the radiosondy.info database and I noticed something that might be an issue. Please take a look at these two radiosondes: - [MEA061741...
Hi, sometime there are some Rs92 in the air but no correct decode data from the software. I updated my TTgo with V0.9.3 but the problem is the same. I...
[https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Receiver-configuration](url) I would like to have the value of the frequency-error (shown on the Display) viewable somewhere in the webinterface too. Perhaps on the DATA-Tab, separately for every received Sonde....
