Andy

Hi Bob, i think you have to clarify what you mean. when you press engage gpredict already sends a initial split request, in dependency of how you did setup the...

ok, i get the point. so the plan ist to change gpredict like this? **when choosing Main ^ / Sub v gpredict will init with: S 0 Main when choosing...

Hi, I would also prefer a function like this. I currently have 2 workarounds to fix the problem a) i start the tracking on a SSB satellite and press T...

Hi, just **brainstorming** to this story: the offset is different for the mode you are using on a satellite. so working on XW-2F in SSB i need a offset near...

Thank you very much for opening this feature request. :-) I would like to mention that doppler tuning should not be completely deactivated. The downlink should be constant, so the...

IMHO this issue can be closed. with hamlib 4.0 it is solved. the only open issue here should be #217 which belongs to ic910, ic9100 an ic9700.

Hi, the setup for gpredict and rigctld is the same as for the ic9700. Apart from the fact that you have to use a different hamlib modell number for the...

more hints and details to this error - https://www.cqrlog.com/node/2195 - https://www.cqrlog.com/node/2299 - https://www.cqrlog.com/node/2346 (clublog gives http error 500 when qso not found)

Hi, i did a CodeReview and the Code looks fine for me. I only use hamqth, so i can not test it in real life. Bye dl7oap

is this still open? or obsolete ?