Paul Pinault

The radio.c configPower function does not configure the RFM95 sx1276 module correctly. The power consumption show the PA is activated at +20dB during transmission even if the function parameter is...

Is there a way to revert the calendar direction ?

1

Actually the calendar is displayed with older time on the left and time growing on the right. I would like to have the most recent period on the left and...

GPIO header

7

Could you add some link to find the 10-12mm GPIO header, they are really hard to find

Kicad project & routing for Hats

1

I create a cicada project with Hat specifications ; it has been used to design 2 hat cards already. It is public and BSD licences ; eventually this project could...

The hat entry is correctly fill with the eprom content but the the GPIO seems to not be set correctly as I choose to have some Pulled UP and the...

Not geting /proc/device-tree/hat

1

I make a shield with the serial eprom flashed with my device description based on the provided tools. After rebooting, configuration of the gpio are not taken into account, in...

PiHole installation reboot raspios when request to set IP as STATIC

3

### Versions - Pi-hole: 5,12,2 - AdminLTE: 5,15,1 - FTL: 5,18,1 ### Platform - OS and version: Pi OS 09-22-2022 - Platform: Pi3 ### Expected behavior During the setup phase...

Not working on SAMD

9

The following code never wakeup after the first sleep call (led always on) #include void setup() { // put your setup code here, to run once: pinMode(6,OUTPUT); } void loop()...

When the Wio Terminal is configured as a slave mode, there is a conflicting definition of the IRQ handler: In variant.h WIRE_IT_HANDLER is defined as SERCOM4 handler whatever the ROLE...

Using a background color for the Connected / Disconnected status improve readibility