Dmitry Ermakov

if driver is DC, then yes, otherwise you'll have to adjust/recompile the driver with DC init

From stock fw, save the following: /proc/umap/* ipctool reginfo ipctool reginfo --script ipctool gpio scan

You should save every file under /proc/umap

use config from 1034, adjust resolution and mask according to umap/vi and try .so from stock

now diff vi from stock and your current vi (while majestic is running)

Oh, its MIPI on stock, omg. So check Input_mode and Input_mod in config, should be like in MIPI configs

Interrupt count is growing, so VI works properly. Probably current driver cant set sensor exposition

[u-boot.zip](https://github.com/OpenIPC/burn/files/10846725/u-boot.zip) Use burn to start this uboot sf probe 0; sf lock 0 Or just start recent kernel from tftp (it just has to start once, no need rootfs or...

SSC377 ``` cat /sys/devices/soc0/machine INFINITY6C SSC027A-S01A cat /sys/devices/soc0/soc_id 249 cat /sys/devices/soc0/family I6C cat /sys/devices/soc0/revision 1 cat /sys/class/mstar/msys/CHIP_ID Chip_ID: 0xF9 cat /sys/class/mstar/msys/CHIP_VERSION Chip_Version: 0 cat /sys/class/mstar/msys/TEMP_R Temperature 64 cat /sys/devices/system/miu/miu_bw0/dram_info DRAM...

take gc2053.bin from stock fw and try