Dmitry Ermakov

Please provide output of ```ipctool reginfo``` ```ipctool reginfo --script``` ```ipctool gpio scan``` from stock firmware and from openipc

Post output of: ```killall majestic; sleep 2; majestic```

Unfortunately we dont have a driver for this sensor.

are you using dev version of webui? this is a known problem with overlay dir structure on different kernels and i think it was fixed already...

This is likely to be a false positive detection, or a very specific board, we dont have such driver, you can check for libsns_imx291.so in your stock firmware

We have discovered that sdk version in stock firmwares are significantly higher than in lamobo-d1, thus we are not sure if that lamobo-d1 is able to start at all. I...

Latest build has mmc support. Also, unlike old boot, new has ability to change various network settings, you just need to see what mode was on original bootloader, MII or...

oh my... where did you get all that from? starting from old bootloader, now openwrt... jeez. https://github.com/OpenIPC/firmware/releases/tag/latest dont use openwrt or anything connected with it

> Where? From OpenIPC webpage (https://openipc.org) :) https://github.com/OpenIPC/chaos_calmer > > Thanks for the link, it is all in there. Universal u-boot is 1kb different one which I've uploaded, but I'm...

> ok, found it. Now SOC variable needs to be in capital leters. with soc it didn't work. After changing soc to SOC /etc/fw_env.config showed up and I was able...