vgm-conv
vgm-conv copied to clipboard
digital-sound-antiques
Chip-type and clock converter for VGM
I'm hoping to map a YM2612 PCM drum sound to a YM2151 FM channel. Use json to configure the YM2151 FM drum sound just like YM2612 to YM2413.
[ZX-PT3 VGM 2023.6.29.zip](https://github.com/digital-sound-antiques/vgm-conv/files/14306011/ZX-PT3.VGM.2023.6.29.zip) I have a lot of AY8910 music that uses EG to generate BASS. Is it possible to convert these special waveforms to FM? Even an approximate conversion...
[quest8_trimmed_trimmed_trimmed.zip](https://github.com/digital-sound-antiques/vgm-conv/files/14307288/quest8_trimmed_trimmed_trimmed.zip) This is an AY8910 VGM that sounds like SID, the short waveform of channel 1 cannot be converted to the YM2151.
Recently I built a SAA1099 VGM hardware player, but the existing SAA music is very sparse and too simple. I want to enrich the saa music library through conversion. SBVGM...
ym2413 to ym2608 is possible, then OPL1/2 conversion to OPNA is also possible, can be implemented and will be interesting
I recommend using the fm3ex mode of the ym2608, so that you can barely make up 9 channels.
[CS6.zip](https://github.com/digital-sound-antiques/vgm-conv/files/11242973/CS6.zip) Just like this ym2413+ay8910 music, the special drum sound disappears after conversion.
I first converted ym2413+ay8910 to ym2413+ym2608.ssg, and then converted it to ym2608.fm+ym2608.ssg. At this time, I found that ssg was two tones lower. If I convert ay8910 to ym2608.ssg first,...
I wish I could specify stereo when converting the default mono like PSG/OPLL, like putting channel 1 on the right.
There are a lot of music using MSX-Audio using the strange combination of Y8950+YM2413, and the number of such tracks is not small, because the MoonBlaster driver uses such a...
Metadata
Owner
Metadata
Chip-type and clock converter for VGM