vgm-conv

vgm-conv copied to clipboard

There are many ZX-Spectrum using PT3 to drive AY8910, these music use the hardware envelope function of AY8910 to change the waveform of a channel. These bass waveforms are completely...

denjhang

converting from AY8910 to YM2608, the key of FM part is lowered

1

Converting from AY8910 to YM2608, the key of FM part is lowered.

fjajktjwjmtt

There are some MSX tracks that use the FM part of the OPL4, I recorded such music as VGM, and found that most OPL3 players using hardware don't allow direct...

denjhang

Hi, This is a feature request : to be able to convert a YM2612 + SN76489 vgm file into a YM2608 vgm. Thanks a lot, and congratulation for all your...

bhrousseau

Convert OPN to OPL series, lose FM3ex extra channel

1

There are many OPNs that use FM3ex channels. The third channel of FM is split into multiple channels for use. I hope this feature can be handled correctly.

denjhang

Currently I want the full support of NGP, which involves dual chips.

denjhang

NGP to AY8910 noise frequency conversion error

4

  The NGP noise frequency seems to be a little different from the normal SN76489.

denjhang

I have a hardware SN76489 VGM player. For NGP's VGM, it cannot play normally, because there are many differences between NGP and SN76489, although both are DCSG.

denjhang

After YM2612 VGM made by deflemask is converted to YM2413 (FMPCM), PCM is lost

3

vgm-conv -f ym2612 -t ym2413 -D dacEmulation=fmpcm -o output.vgm in.vgm

denjhang

Is it possible to add this feature?

denjhang