Dhana Kaneshayogan

Does hitting the reset button force the keyboard to register? I had a similar issue when switching inputs using a hub, and hitting reset when switching inputs fixed it. Sent...

No. You need to flash the keymap to do that and that involves putting the keyboard into bootloader mode. Sent from my iPhone > On 12 May 2022, at 05:50,...

Are you using VIA or something else? AFAIK, hitting reset forces the board to re-register. If you’re using VIA and reset isn’t forcing the board to re-register then I’m out...

Most people will reassign ESC to CAPS LOCK.

That was exactly it, thanks! Is it not possible to have the same corners for all the closed layers to make assembly simpler?

I am using a USB cable with a heat shrink with no problems. You could create more space by stacking the open layers, or horizontally by making the open layer's...

So, if it helps, I believe I compiled my keymap from the command line using the Makefile in QMK. I also have the same problem with the Discipline I built...

I'm running into an issue where my command line script's output to stdout, stderr is not captured in recipy. Is this related to what I'm seeing? I can see Git...

Me me me! @mmEisen and I are working on a script to do this. Will write some documentation for how to run it too.

https://github.com/tjguk/networkzero/pull/47 submitted to address simplifying objectives here https://github.com/raspberrypilearning/networking-lessons/blob/master/lesson-1/lesson.md and to also provide some minor troubleshooting assistance.