delboy711

Data corrupted between MQTT and Jee Interfacers

3

I am sending transmit data via MQTT to a remote node. The data is a single value sent to Node 24. The Jee interfacer passes the message apparently OK, but...

Suggestion: Controller v4.6 Add pull up resistor to U1

1

Since the level converter U1 is so very tiny and can be a challenge to solder, may I suggest a pull up resistor is added to pin 6 instead of...

While commissioning my new emoncms server I came across a couple of syntax errors in EmonHubMqttInterfacer. In my application I am sending mqtt messages into emonhub for transmission over RF69...

SNA Solar - Bad Address Errors

1

Hi, I have been using @stuartpittaway 's original SMASolar code for many years, but am now building a new emoncms system based on a VM running on an x86_64 server....

I have just started using the Octopus app and found the 'Import Go' costs are always £0.00. I traced the problem to the function graph_load() the code block starting at...

Adding tariffs to costcomparison app

1

The Cost Comparison app is nice, but it does not have many tariffs, and they are not up to date. It would be nice if the user could add their...

Using diyBMS ver 16-08-24 427a56 I am using Pylon protocol over RS485 to regulate my battery charging from an AC power supply unit using a home built PSU regulator. It...