David Elias

there are MANY examples how to interface sdcard to esp32... just google a little. I find what library specifically I did use to sucess: I call gif files from sdcard,...

Greetings Step 1. Make that TFT display works with your esp32, wire after you already wired the SD CARD interface. Then, test TFT without SD CARD or even library of...

May be a Power supply issue, consider 10-12A per panel Best regards

thank You El jue, 11 mar 2021 a las 3:58, Carlos Alberto Ruiz Naranjo (< ***@***.***>) escribió: > Thanks @lepommosaure we will fix it :) > > — > You...

Greetings, First, link or exact version of your 64-bit OS ?

Greetings, A good start is doing the examples issue with only ONE panel... if You have one, other panel already known as compatible... then try with yours, use a 3-4A...

- check your environment, use -> pip list, this shows all packages installed in the current environment; must be present opencv_python (cv2)

Greetings If You don't know what type of RGB PANEL have, try with different values of --led-multiplexing=XXX good luck

Greetings, try different values of --led-multiplexing=0(default), 1, 2, 3, 4 ... 8 (this works for my outdoor P10 panels) 9, 10, 11..... also, asure to use --led-gpio-mapping= "regular" best regards

Had You tried to define 10 panels (1 ghost panel)? Good luck