Cru Waller

Wow, which receiver has 40 channels? 👀

Yeah, but my point is that receiver has to send 40 to make your requirement possible from conversion pov :) I dont wanna include a special scenario into firmware itself....

CRSF can have up to 16 channels. I will make a version with full 16 channels and your application can then map those. This is similar case to flight controller...

That is up to your application to handle. This converter does not care about a function... Just pushes received channel values to PC using the USB game controller packet :)

Sorry! I didnt realise this before... 🤦 Passthrough flashing is on my todo list but i havent have time to finalize it.

Hello! I am not a very good with the Windows specific issues but maybe you could try this: * uninstalled the non-working device while it was still attached * then...

> tested as well, using same board above. to test, directly connected to X9D radio controller outputting CRSF and connected to A3 of bluepill. plug the bluepill to pc, the...

This particular issue is weird... I played a bit with mine and cannot reproduce this 🙄 ... Need to investigate further and check if STM has some USB driver updates

This firmware does not do any conversion between different protocols. This just captures a signal from RC receiver and converts it to USB HID game controller packets.