rc_receiver_to_usb_hid
rc_receiver_to_usb_hid copied to clipboard
cruwaller
USB Code:10 with cheap STM32F103C8T6 board
Hello! I'm trying to use https://aliexpress.ru/item/32792513237.html board. With pre-build firmware https://github.com/cruwaller/rc_receiver_to_usb_hid/releases/download/v0.5/release_v0.5_Sim_CRSF.bin Usb device detected (CrsfJoystick), but not working
This device cannot start. (Code 10)
Tested on macOS 10.13.6 and Windows 10
Hello!
I am not a very good with the Windows specific issues but maybe you could try this:
- uninstalled the non-working device while it was still attached
- then menu item: Action...Scan for hardware changes
hope this helps.
@cruwaller Thank you! I've tested both solutions and no luck. I've also tested usb mass storage demo and it's working with this board.
tested as well, using same board above. to test, directly connected to X9D radio controller outputting CRSF and connected to A3 of bluepill. plug the bluepill to pc, the RC simulator can detect as CrsfJoystick but no stick movement
tested as well, using same board above. to test, directly connected to X9D radio controller outputting CRSF and connected to A3 of bluepill. plug the bluepill to pc, the RC simulator can detect as CrsfJoystick but no stick movement
Handset is outputting a bit different format... Does not work. Input must be "CRSF for flight controller"
This particular issue is weird... I played a bit with mine and cannot reproduce this 🙄 ... Need to investigate further and check if STM has some USB driver updates