Croc
Croc
Fixes #[issue_no] ## Summary of Changes Prototype to see what changes are needed in case we need systems on a bigger plane. DO NOT MERGE ## Screenshots (if necessary) ##...
Fixes #[issue_no] ## Summary of Changes Some bigger planes might have a separate hydraulic section for cargo doors handling. This PR is adding this possibility. Note: Cannot be tested in...
Fixes #[issue_no] ## Summary of Changes This PR adds a mechanism to be able to limit actuator speed in extension or retraction (up to a zero speed). It can be...
Fixes #[issue_no] ## Summary of Changes An simplified oscillation/viscous model will simulate fluid movement in hydraulic reservoirs. Lateral/longitudinal accelerations might impact fluid level seen by the gauge. Flying close to...
Fixes #[issue_no] ## Summary of Changes Each actuator has inlet or outlet flow restricting valves. This PR models the factory dispersion of such restrictions, causing some variance in all actuator...
Fixes #[issue_no] ## Summary of Changes Default gear lever mechanism using GEAR HANDLE POSITION simvar causes bugs with ground collision detection (landing gear down with gear lever up causes wheels...
Fixes #[issue_no] ## Summary of Changes This PR allows to give a trim angle offset to any physical assembly. This will impact acceleration effect and aerodynamic effect when moving the...
Fixes #[issue_no] Sets expected discrete signal values for speed warnings of ADIRs when they are fault or off. When ADIR 1 and 3 are off, gear safety valve will close...
Fixes #[issue_no] ## Summary of Changes Implements some workarounds to present a gear swing test ## Screenshots (if necessary) ## References ## Additional context Discord username (if different from GitHub):...
Fixes #[issue_no] ## Summary of Changes Implements realistic rudder control and its interaction between hydraulics and flight controls. - [x] Trimming actuator using 2 AC motors - [x] Travel limiter...