coseyfannitutti

That's absolutely not my intention at all. About half the orders have already gone out, and a lot (hopefully the remainder of all outstanding orders) will be going out in...

Are you certain that you have the 2x "discipline-top-2" pieces in the correct orientation? On those two pieces two of the inner corners are sharper, which are meant to be...

You need to press the BOOT button on the PCB for it to be recognized when trying to flash. If the 'make fuse' command was not run, this can also...

You will need to [download and unzip this file](http://www.madwizard.org/download/electronics/msys-1.0-vista64.zip). Copy msys-1.0.dll to the \utils\bin directory of your WinAVR folder That will take care of the child died before initialization error.

You don't need to run the 'make' command. You only need 'make flash' and 'make fuse'.

Are you certain that your crystal is 16MHz / 18pF? Something between your USB port and your microcontroller is not right, and this appears to be a physical issue on...

Make sure the microcontroller is seated properly and that none of the pins going into the socket are damaged. Otherwise, it sounds like you've got some damage on that column...

@I0PNR pinging you here because I caught a couple typos, and said F7 a few times, when F6 should be the key to be looking at.

No, at this time I am unsure of the root cause of it being detected slowly on MacOS. This issue does not happen with Windows. When I find some time,...