Scott Hanson

It's probably more a JLC issue, from December - March-ish it lined up perfect, now it's been all over the place.

Is the 340 with the "STANDARD" the problem? The second 340 is a value for the 5 code above it, I think. ...

Benny Megidish's JLC-Plugin-for-KiCad is currently in there https://github.com/bennymeg/JLC-Plugin-for-KiCad

Maybe this is OS related, I used Kicad 6.0.8 and Windows 10 and do not see this issue

I copied the process mostly from the appveryor and it doesn't work on my machine. I have msys2 installed on my Windows D drive, so I don't know if that...

I am using a esp32 board with a Ethernet adapter. I want the user to connect to the esp32 wifi AP and be able to configure the Ethernet settings thought...

running 'sudo rfkill unblock all' fixed this issue for me

I use the netDxf C# library to based my code off. I was creating DXF with LibreCAD and it was causing issues with netDxf. In LibreCAD, currently a string is...

can this be fixed for v2 or does it have to be pushed to v3?

This was mostly fixed when I switched it using the center of the bounding box for Thur hole parts during exports, parts over hanging the edge still had issues. 217580d2045772c84c3322a97af129dcb226a4f4