Scott Hanson

And set J28 to the VIN position i.e down

its a different PCB but if you look at this PDF find the "Test Power" section and verify your voltages. I would do it with the BBB not connected until...

The OLED will not turn on until you flash the EEprom or set it up in FPP. You also have to solder the jumpers under the OLED to the correct...

If running FPP 6 you should flash from the cape menu option. It needs to be the V2 version

it was moved to Help->Cape Info in FPP 6, The file you found in the repo had an error, I uploaded a new one here: https://github.com/computergeek1507/PB_16/blob/master/BBB_16_SMD/BBB16v2-221118135219-eeprom.bin

The EEPROM file is 4KB so any EEPROM 4KB or bigger should work. "24LC32A-I/P-ND" or "25LC640-I/P-ND" are two I found doing a quick search. I haven't tested them, so order...

What is the specific board or file?