commander-bln

i also need the cells voltage, the scetch only use the "pwr" Data (works fine), what have to be change to also get all the data from "bat" ?? have...

hi first- you need a Max3232 for converting the serial2ttl for the console port of the pylontech sec. you can use any esp8266 or better the esp32 with 4MB if...

i have tried it with my new pylontech US5000, Sketch works fine, i have updated the scetch to use with ESP32 and the first change to get SOC in MQTT,...

hello tomasvida can i send you my *.ino file diretly? or shoud i post it here??

[PylontechMonitoring-ESP32.txt](https://github.com/irekzielinski/Pylontech-Battery-Monitoring/files/10807248/PylontechMonitoring-ESP32.txt) i hope this is better i will try to get the "stat" Data also, but this will not be so easy as change a good code

@rickyrickuk sorry, not yet i hope now in the darker time i have more time to try a little bit i will post here when i find a good solution

@rickyrickuk stat shows 1st Batt if have more then 1 then stat 1 is the first CYCLE Times : 163 stat 2 is the second CYCLE Times : 92 stat...

I am using the script on an esp32 with 3 Paylontech US5000 Battery's, -> works fine, but i want it with Ethernet instead of WLAN (for better stable-faster connection) is...