Collin Kidder
Collin Kidder
No, I think it had to do work all of the extra stuff I added for elm327 emulation. Also, it could be just me. On May 6, 2014 4:28:08 PM...
Yes, I'm still not entirely sure of *why* it happens. It happens sometimes seemingly randomly. It happens more to some people than others. It does seem like it must be...
I have confirmed this behavior on my end with a GEVCU 4.2 board and the current (as of right now) version from the ArduinoDue branch. It still doesn't make sense...
Additional debugging info: Device starts up and soon after output 4 is active. It never seems to deactivate on its own. This makes sense, output 4 is listed as the...
Revisited this after Jack mentioned it to me at EVCCON. It seems that the issue is likely that TIOA is configured as an output by the Timer Counter hardware as...
Is this still happening with the 5.2 hardware? I should find out.
I'll be honest, it has been several years since I last used a GEVCU4. But, being able to upload the firmware successfully is a good sign. What is returned if...
Probably. Which is why I did list wifi as one of the options. I absolutely do think that the fault read out should be on the website. That'd be so...
I originally wanted to use the existing PID specification but I looked at all of them and 98% of them are totally irrelevant. There are hundreds of codes for O2...
I suppose I can see what you're saying - you want to keep the web interface simple so that mortal man can easily configure a few things and drive away....