Santiago Hormazabal
Santiago Hormazabal
Hi, I've configured a new network card, one that I've mentioned before (the UMC UM9008F) with IRQ = 3, IO = 300. On my SBC, the ISA IRQ 3 is...
Hi, continuing with the integration of my SBC (which is a step-up above a "base 8018x"), I'm trying to enable the secondary uart. In order for this uart to work...
RTC support
Hi, I've now assembled [my own 80C188EB SBC](https://oshwlab.com/cocus/80c188eb-sbc) that I've made following the reverse-engineering I did on the actual HDSL modem board I was running all my tests before. I...
Hi, I've set up a docker container with ubuntu 22.04 on it, and I can't build the crosscompiler toolchain (when running `./build.sh`). This is most likely due to the gcc...
Hi, I'm trying to build this under the Android build system for an aarch64 target. I've hit some other issues, but this one seems to be the most interesting. I...
 This happens on line 360 of loader.cpp. The struct gets a proper pointer in memory, and fd "should be OK" (although it's fd=3, which it's a low number, but...
Hi, I'm following the tutorial on https://linux-sunxi.org/Allwinner_Nezha#Manual_build, where it states that the newest u-boot sources (not yet merged to mainline) don't require boot0 + TOC1. It produces a single binary...
Hi, I have an old Lumia 630 over here, and would like to use it. I saw that Lumia-drivers doesn't have a definition for this cellphone. Does any of the...
Hi! I found your project thru your Youtube channel. I figured that you want to improve it further, and I think you can use the SoftwareSerial provided by the Arduino...
Hi, I found this device and I'll like to use it hopefully with libnfc. I think this should be straightforward, but this particular device has 4 contact interfaces, one contactless,...