cochcoder

> @cochcoder unknown. I haven't actually fully measured it but if it's breaking past github's limit of 15gb then there's your (not accurate) minimum I've never seen a Flatpak for...

@AC5SHOT Can you upload the profiles for the Guider 2s, through screenshots or copying and pasting? Whenever I try to access the Flashforge slicer, it ends up crashing on me.

> hey i uploaded it here > > on github i don;t know why but i was having issues uploading directly > > https://github.com/AC5SHOT/guider-2s/tree/main/slice%20profiles%20and%20a%20benchy%20gcode Thanks, I'll look into implementing these...

@AC5SHOT @DirectDesignNZ What are the G-Codes are used in Flashforge slicer for this printer? What filament types can this printer handle? Thanks for your help!

> @cochcoder @DirectDesignNZ > > > > im honestly not able to ascertain anything abiout the type of gcodes other than the fact that its labeled as > > >...

Can you please try and see if you're able to successfully print with this [build](https://github.com/cochcoder/OrcaSlicer/actions/runs/8912320699)? I doubt that you would be able to as it seems that you need a...

> hey cochcoder sorry it didn't work, it keeps saying > > error : relative extruder addressing requires resting the extruder position at each layer to prevent loss of floasting...

> hey with the G92 E0 fix it keeps outputting "failed to generate g-code for invalid custom g-code > > > > machine start code parsing error at line 2...

Here is a new [build](https://github.com/cochcoder/OrcaSlicer/actions/runs/8946266650) that fixes the G-Code errors on my end

> hey im still having the issue gona assume its just the repo hasn't pulled yet and will try again tomorrow Did you download the new build?