blackbox-tools
blackbox-tools copied to clipboard
cleanflight
Tools for working with blackbox flight logs
Select graphs to draw by name. Group it. `((Name, data_name, data_name), (Name, data_name, data_name), (Name, data_name, data_name))` Something like `(("Attitude", "atttitude[0], "attitude[1]"), ("RC Input", "RC Command [roll]", "RC Command [pitch]"))`...
Change icon to different aircraft (at least the most common for inav: wing, plane) to match controls (1/2 motors and 2 to 4 servos) It would be nice if naming...
Dashware
Nick, Is there any tools available to convert the current blackbox log to something Dashware can read? I couldn't get the old tools to open. This is from the FAQ...
In blackbox_decode the acceleration out in done in controller coordinate system. It would be useful to have possibility to output accelerations in the Earth coordinate system, with gravity removed (az-1g)....
While converting *.BFL file to *.csv in the headers there are units of barometer (cm), rotational velocity in ex. (deg/s) and acceleration (m/s/s) if the units were selected by command...
I use 'blackbox_decode' for retrieving GPS tracks from iNav logs. Sometimes it happens that a single file contains more than 31 logs. For this reason I increased constant FLIGHT_LOG_MAX_LOGS_IN_FILE. Is...
When decoding log files from blackbox_decode it would be great if the PID tuning values used during that log were output to a text file (rather than having to keep...
blackbox_decode does not compute RC rate and PID error (for anyone interested in doing offline analyses on these). My current workaround is to load the log in explorer and save...
Hi all, I am trying convert the decoded blackbox CSV data into actual conventional sensor readings that we are viewing on Blackbox explorer for my own analysis. Would like to...
In gpx decoding the file only contains the relative timestamp from the beginning of logging. When there was a GPS Fix on Arm there is an absolute timestamp in the...
