casainho

hibernation fails

47

Thanks for sharing!! If you have any guess why hibernation fails or where I should report... ---- I would like to report that I am now running Ubuntu on SP4,...

OpenSource firmware for BLDC motor controller, chinese ultra cheap

1

Hi. I wounder why there isn't a shield for Arduino to control BLDC motors and using the advanced FOC!! Great project!! I am being devoloping this OpenSource firmware and I...

Suggestions: Linux board; larger display of 8 or 9 inches; 3D printed enclosure

14

Hi. Great project, the motivation correct and is strategic!! and I would love to use the final version. Some ideas: - some board to run Linux, I guess that would...

Link is lost when pasting a text with link (on WYSIWYG)

6

### Operating system Linux ### Joplin version 2.12.19 ### Desktop version info Joplin 2.12.19 (prod, linux) Client ID: 8f4688faa3ef425d967272b789cf1a29 Sync Version: 3 Profile Version: 43 Keychain Supported: No Revision: 7081046...

Suport UART commands VS LispBM commands

2

I see the LispBM has access to almost all variables while the UART don't. I need to set motor currents in real time and so I had to add the...

Add command to set target speed and max current - needed for EScooters

10

My Fiido Q1S 12 inches wheel, seated micro scooter, with a hub direct drive motor that has very low torque and very high speed motor, runs at 160 kms/h(1)!! Is...

Hi. Thanks for all the information!! I learned a lot!! I shared my notes for repair or hacking the Ketonix, that uses similar technology (at least the same sensor): https://github.com/casainho/ketonix_keto_breathalyzer

Add Zigbee

2

BL808 list Zigbee support - can you add it??

BL808 list Bluetooth support - can you add it??

Chat discussion channel of this project

11

Hi. Seems the people behind this project want to develop the "Arduino" of dog walking robots based on this words from the project site: https://stanfordstudentrobotics.org/pupper > Stanford Pupper is a...