cariboulite
cariboulite copied to clipboard
CaribouLite turns any 40-pin Raspberry-Pi into a Tx/Rx 6GHz SDR
Estimados Amigos: Hace 2 días finalmente llegó mi placa Cariboulite, y estoy muy contento de haberla recibido, pero no logro hacerla funcionar. La tengo instalada en una Raspberry PI Zero,...
I just got my Caribou Lite (6GHZ R2.8) from mouser. I am having issues getting it working. I just want to verify that there should be no components soldered in...
Hello, I am about to start setting up the unit I received about a month ago. After reading the info on the main page and crowdsourced page, I have some...
Since i am puzzeling for weeks to be able to receive a signal, from my porto or even a radiostation... i am able to compile without issues on a pi4...
Hi, Finally managed to make the CaribouLite work. My setup: RaspiOS 64bit on Raspberry PI 3B Latest main branch Although there is a bug in the install.sh script which fails...
I can confirm the whole build procedure does work. This is my current procedure 20-02-2023 pi os light 64 bit increase swap sudo dphys-swapfile swapoff sudo nano /etc/dphys-swapfile CONF_SWAPSIZE=2048 sudo...
Hi, Just discovered the Cariboulite videos. What were the three or four commands for checking the communications to the device and what to expect? thanks!
All, i would like to make an proposal. We have a discussions tab and we have the main page. We all try to get the cariboulite hat working on all...
Is there any 3D printed case for RPI 3/4 + HAT available somewhere ?
Seems to hang on installation on a PI 3. 64 bit ![image](https://user-images.githubusercontent.com/65192818/221752027-d6c0572e-6449-421f-a77e-aa865b9f9069.jpeg) Any suggestions? I'll try to install Soapy From the GitHub site? Steve