cariboulite

cariboulite copied to clipboard

Is this project abandoned?

30

Seems to be little to no activity in the past few months and many issues are still outstanding during that time. No PRs appear to be accepted. Mixed reports of...

codyc1515

Cannot execute the flow graph in gnuradio-companion

3

I have tried to install the software for cariboulite as described in "installation.md". It works very well. The tests like cariboulite_test_app and SoapySDRUtils were also successful. Next I have modified...

gerd0355

PI 4plus SMI conflict

6

This is likely NOT a caribou issue, but I'm stumped debian bookworm sudo modprobe bcm2835_smi sudo modprobe bcm2835_smi_dev sudo modprobe smi_stream_dev dmesg [ 1413.067473] pinctrl-bcm2835 fe200000.gpio: pin gpio2 already requested...

bferrell

first probe fails to initialize the device, second one makes it work

1

changed fifo to 2 in /etc/modprobe.d/smi_stream_mod_cariboulite.conf and ran `modprobe smi_stream_dev` ``` [2122501.219834] smi_stream_dev: loading out-of-tree module taints kernel. [2122501.228047] smi-stream-dev: smi_stream_dev_probe (fifo_mtu_multiplier=2, addr_dir_offset=2, addr_ch_offset=3) [2122501.228286] smi-stream-dev: creating a device and...

great9

Problems with the Raspberry Pi OS (64-bit) version.

39

Today, I created new version of the recommended Raspberry Pi OS (64-bit) port of Debian Bookworm and installed it on my Raspberry Pi 4. The first problem is that it...

righthalfplane

SMI Write Timeout when transmitting IQ via SoapySDR API

1

After [''enabling'' the TX support with Soapysdr](https://github.com/cariboulabs/cariboulite/pull/162) I noticed that the IQ transmission doesn't start and the TX led never lights up! Upon Furher investigation and debugging I've found the...

Paulo-D2000

Exceeding Band limits deactivates channel and requires app restart

1

S1G (and HiF) device work as long as I do not go outside the frequency limits. When I do, the channel is disabled. I have to disable the SDR app,...

K7MDL2

Software Installation

1

I have tried to install the software for cariboulite as described in "installation.md". It works very well. The tests like cariboulite_test_app and SoapySDRUtils were also successful. I could also test...

gerd0355

No receiving any signal.

19

Has anyone actually managed to tune in to any frequency yet? I finally have it running on my RPI Zero 2W with SoapyRemote but I cannot even pick my local...

daviddawe1982

Error in install-script

1

Hi, When running install.sh for more then once, this is happening: [ 3 ] Installing into '/lib/modules/5.10.103+/kernel/drivers/char/broadcom /lib/modules/5.10.103-v7l+/kernel/drivers/char/broadcom /lib/modules/5.10.103-v8+/kernel/drivers/char/broadcom /lib/modules/5.10.103-v7+/kernel/drivers/char/broadcom /lib/modules/5.10.103-v7+/kernel/drivers/char/broadcom/broadcom' cp: kan map '/lib/modules/5.10.103-v7+/kernel/drivers/char/broadcom' niet kopiëren naar binnen zichzelf...

loewal