carcamerarig

How have you got on with this, I'm eagerly following your efforts.

> > How have you got on with this, I'm eagerly following your efforts. > > > > I haven't touched it in a week or so, but last I...

hey, sent you a request Many Thanks Justin Edgington. Visit us: Car camera Rig Email us: ***@***.*** Follow us at: Facebook Call us: +44 (0) 7973 746192 On Fri, Apr...

Not sure if you saw it on the other thread, sent you an email.

How is this progressing now?

> Hi! I did try it out with some RGBW a long while ago. There's the `rgbw` branch that I made back then: https://github.com/usedbytes/neopixel_i2c/tree/rgbw > > > > To be...

Printed test with Extrudr PETG 1.75 usually print at 230 /85 lowered to 220/ 70 for this test. Struggling with stringing from the point at when the extruder moves away...

I have already asked there, but didn't get much response so trying to understand what's happening myself and come up with a solution, it's why I asked here. The photo...