Adam

Didnt manage to get the calibration perfect yet. We followed your calibration explanations @ https://github.com/kriswiner/EM7180_SENtral_sensor_hub/wiki/F.--Magnetometer-and-Accelerometer I will go though the calibration again lets see but would not have though it...

Thanks Ill give it a go in the morning

So thanks for linking to the other code from Greg:) So far I at least narrowed down the problem I think we were having...which was It seems is because the...

After calibration of course the USFS works fantastic. Thanks for all your help Kris

I have the sensor board working great on the Teensy 3.6 @ 5khz. Managed to compile for ESP32 but gee its bad at less than 700hz and looks like a...

Yep chasing my tail on this one, one good reason to have the teensy though just to know how fantastic it can be. Ill send you a mail and perhaps...

ok little chasing things down. Seems on on STICKBREAKER V0.2.2 for an adapted version for the teensy code (just changed the Wire.endTransmission to true ). Ran some older code from...

So now running with latest github version #define STICKBREAKER V1.0.1 I get the following results. Something still isnt right for the update @ rate = 705.95 Hz Sub par.

Not sure which part is causing this to be slow so uploaded the sketch as text. Cheers Chuck. any insight welcome. [EM7180_MPU9250_BMP280_prepESP32.txt](https://github.com/kriswiner/EM7180_SENtral_sensor_hub/files/2480632/EM7180_MPU9250_BMP280_prepESP32.txt)

ok, so is the guide thats on the wiki what we should use? Im just trying to figure out how Im going to able to write to the EEPROM if...