Ben S

`Connect to power` screen transitions the wrong way

1

After being provided the warning that the machine should be plugged in before continuing the installation, selecting `Ignore` will transition seemingly backwards(left to right) to the `Drive Encryption` page. This...

lemp9: Left side of system heats up when AC adapter is plugged in

3

The A/C barrel plug adapter for the lemp9 is on the left side of the system. When the adapter is plugged in the left side of the system gets warm,...

When a M.2 NVMe drive is plugged in to SSD1 and an M.2 SATA drive is plugged into SSD2, only the NVMe drive is recognized in the firmware boot manager....

lemp9: Right click on touchpad

2

With the strong majority of my experience coming from laptops with discrete left/right mouse buttons, I expected pressing on the right side of the touchpad to be recognized as a...

Discard any prior keypresses prior to asking for shutdown confirmation when the firmware update has completed.

leow9-w firmware updating process is incorrect

2

The current documentation has instructions for the leow9/-b which is different than the -w. This needs to be updated with the instructions to update through an EFI shell

I think the version listed in the changelog is the same as the new firmware. Is that a mistake on our part or there's?

Update wilp12 README with checksum when available

6

Also update checksum and bios version info when customized bios becomes available.

List updated version

1

Mention the updated firmware version that the customer should expect to see after doing the update.

Threshold for powering machine on is higher than for keeping machine on

1

I have found that under a certain battery threshold, the machine will not power on (without AC). This threshold however is higher than the threshold of keeping the machine running....