Vladislav
Vladislav
> Same problem here, do you solved it @ssokol? Are you found solution @TilmanGriesel I have problem with centripetal force [also.](https://github.com/arduino-libraries/MadgwickAHRS/issues/43)
Hello @chaitanya-smartrotamac I changed **mpu9250** on another sensors. For `gyro` **l3gd20** raw data converted to `rad/sec` and paste in code. For `accel` and `mag` **lsm303dlh** raw data converted to `9.81G's`...
> Hi there! fyi, Finally I coped with the problem. The problem is - fake board. My mpu-9250/6500 was a fake (. So, I've changed the board and problem dissipated....
I use an `Adafruit 10DOF` breadboard. I orient it vertically, as in the picture.  In the settings I select the orientation `RTIMU_XSOUTH_YDOWN` https://github.com/jordandcarter/RTIMULib-Arduino/blob/cac4454680dd6798f1f4d7fa61ab465e960dd570/libraries/RTIMULib/RTIMULibDefs.h#L96 And everything seems to work, but...
Hello @HongshiTan, @adityasivaraj and @SivertHavso. I'm using [library](https://github.com/jordandcarter/RTIMULib-Arduino) code `RTIMULib` for Arduino. But there is no RTFusionKalman4.h file in the Arduino repository There is a simplified (according to the author)...
> How did you let this package work? my mpu9250 can not work Good afternoon @maemoKKK Were you able to figure out the code or maybe you found another solution...
I simple copied code from example. Please delete wrong code from: https://www.plivo.com/docs/getting-started/text-to-speech-on-a-call/ Too bad no wonder why your service does not support Unicode ... I change my xml file: http://site.ru/answer.xml...
@prenticedavid please help and answer.
Hello @cyoung and @jpoirier A little off-topic, but could you please tell me, `Stratux` uses data from `MEMS` sensors that are already `prepared`, i.e. is sensor fusion done inside the...
I added in SPIFlash.cpp into function SPIFlash::initialize() code: ``` SPI.setMOSI(PB5); SPI.setMISO(PB4); SPI.setSCLK(PB3); ``` and got the following ``` boolean SPIFlash::initialize() { #if defined (SPCR) && defined (SPSR) _SPCR = SPCR;...