Bram Duvigneau

[**@jameswilson**](https://github.com/jameswilson) commented on [Feb 7, 2018, 1:26 AM GMT+1](https://github.com/jackmoore/colorbox/pull/832#issuecomment-363613185 "2018-02-07T00:26:23Z - Replied by Github Reply Comments"): > Would you mind to add an issue description to summarize the additions you've...

Same issue on Windows. After checking the Terraform binary, it seems I somehow installed the 32 bits version, was solved after using 64 bits.

I also observed the same behavior with latest alpha. The strange thing is that I ran a build with an earlier version of PR #14888 and that seemed to have...

@XLTechie You indicate that there is a "HumanWare" version, does this mean that your Zoomax is not made by HumanWare? Do you know if it is a USB serial or...

@XLTechie Based on BRLTTY sourcecode, this display seems to use the Baum protocol. However, the vendor and product IDs that I see in BRLTTY are not listed in NVDA's Baum...

On 4-12-2023 13:22, Luke Davis wrote: > > @bramd Unfortunately, it does not. I can > select the Baum driver when the display is connected (but not when it >...

@tmthywynn8 Thanks for the input. From your log it seems the display doesn't respond at all to the request from the driver. I'm not familiar at all with this hardware,...

@tmthywynn8 As far as I know, Narrator does not ship with BRLTTY 6.6 and always as an "M" suffix after the version, such as "6.4M". So I think you somehow...

@tmthywynn8 Based on that driver the changes seem very minimal. It seems this device does not respond to a cell count request and therefore the Baum driver will not recognize...

@tmthywynn8 Good catch. I was just looking at their driver, which hardcodes the cell count and didn't compare it to the BRLTTY log this time. So I don't know why...