bombsquad85
bombsquad85
> reflashed and now fixed. Glad it's working
> Hello, what's hardware version on the BDsensorM, there is a different of the SDA and SCL pin number between the V1.0 and V1.1, which you can see from the...
> Hello, what's hardware version on the BDsensorM, there is a different of the SDA and SCL pin number between the V1.0 and V1.1, which you can see from the...
> the pin name should be configured as following for the BDsensorM v1.1 connecting to Octopus 1.1 with EXP1 > ``` > sda_pin: PE10 > scl_pin: PE9 > ``` >...
> did it home z axis success? normally, it will home z axis without problem but will take more time to touch the bed, also I am planning to reduce...
> > you can use the old methond to compile: > > ``` > > ~/Bed_Distance_sensor/klipper/install_BDsensor.sh > > make > > ``` > > > > > > > >...
when i follow the directions above, i get rid of the red screen errors, however when i check the connection to the BD sensor i get this: 11:15 PM No...