Ben Maddocks
Ben Maddocks
Initial support for Portenta H7. Very easy and simple additions to get the Portenta H7 up and running. I put it into its own folder, not sure if thats correct...
I have tried the kernel and the new branchs. dmesg shows a complaint that the firmware is for 8723 but card is 0x4ce1. Both branch's work on 3.19.x for me,...
Hello, Im new to this but the lib/sketch was unable to authenticate correctly on esp32s3, im foolish but i think it requires dual mode and S3 is strictly BLE no...
I have a tiny f4101cc which ive always used interchangeably with my blackpill the same firmwares unmodified have always worked on both, but in libopencm3 the 401 wont enumerate...It doesnt...
The wz5005e shown here with teardown and pics, https://robojax.com/learn/arduino/?vid=robojax_WZ5005E_5A_buck_LCD at the very least looks similiar, but supports the same io (but diff modbus protocol),same specs and damn close model number...
rather then remounting msdos manually everytime or run a script , id prefer to have it automatically do this so drag and drop just works, also set permissions for write...
to get it to work i python-zeroconf upgraded to 25.1~ stole this version of source from arch linux and used ubuntu's debian folder and updated changelog pychromecast https://salsa.debian.org/python-team/modules/pychromecast #required python-zeroconf...
Hello , Love the app! on my aging 20.04 install the latest sources fail to connect; Verbose level: 3 Version: 1.3.0 222 - Warning: libpng warning: iCCP: known incorrect sRGB...
Bad news, you have a `82801JIR (ICH10R) LPC Interface Controller` so you have ME hardware on board and it is very difficult to remove, continuing... RCBA at 0xfed1c000 MEI not...
Been using this on various arm64 devices arm-none-gcc-7 will fail on serial stuff so i used 9/10 and everything has worked great, all thats needed to add support is a...