Thomas

I made some researches @Egosumumbravir Prusa made a calculator where you can find the "magic numbers" and it seems that 0.15mm is the correct number for that printer : https://blog.prusa3d.com/calculator_3416/

> It depends on what leadscrew/belt pitch you use in the Z axis system + "step per Revolution" of the step motor + gear ratio. > > And don't forget...

> Just look in the menus for Pete's sake. > >  This is the right answer, @kozross please don't forget to close this issue.

I have made some tests and it seems the screen only reads those data generated by cura engine at the very begining of each file : ``` ;FLAVOR:Marlin ;TIME:3508.43 ;Filament...

> Yes, in Creality print you check a box to run the LIDAR calibration. Right now you have to download the file then go to the printer touch screen and...

Please export and share a gcode file

> Yes "uname-r" returned "6.1.19v8+ > > The driver was working b4 until I did an update using GUi over the weekend which upgraded the Kernel header. I had the...

> Well, I'm running Linux 6.1.63-current-meson64. I fixed the issue with the driver. The make script did not copy the new driver in the driver's folder. This was the error......

I upgraded recently to Debian Bookworm, installed Linux 6.6 and updated my scripts (adding rx and tx levels, brought by this PR : https://github.com/kasbert/epsolar-tracer/commit/7e30e9398683ae79ec495641ccc5744e42180be5 ) Everything is now working flawlessly...

This issue is still there in Orca v2.0.0 :-)