Enable Lidar for K1 Max. Creality allows use on Firmware 1.3.3.3

[bhast2]

Is your feature request related to a problem? Please describe. Lidar feature on the K1 Max. It can be used with the new firmware 1.3.3.3 Here is the change log from Creality : LiDAR pressure advance re-worked (Only K1 Max), compatible with Creality Print, Prusa, Orca slicers

Which printers will be beneficial to this feature K1 Max

Describe the solution you'd like Enable Lidar feature

Describe alternatives you've considered Use a different slicer

Additional context https://raw.githubusercontent.com/Guilouz/Creality-K1-and-K1-Max/main/Changelogs/Changelog_1.3.3.3.txt

[Ocraftyone]

I am a bit confused on what change needs to be made to the slicer. Is there a command that should be added to the profile or more that needs to be done?

[Myklt8]

Yes, in Creality print you check a box to run the LIDAR calibration. Right now you have to download the file then go to the printer touch screen and start the print from there with calibration checked

[bistory]

Yes, in Creality print you check a box to run the LIDAR calibration. Right now you have to download the file then go to the printer touch screen and start the print from there with calibration checked

Unfortunately, Creality didn't share any information about what command has to be shared before printing... So at the moment we have to deal with what we have (send to printer then print from screen if you need PA automatic calibration).

[teamfighter]

Subscribed

[github-actions[bot]]

Orca bot: this issue is stale because it has been open for 90 days with no activity.

[github-actions[bot]]

Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale.