BIGTREETECH-TFT24-V1.1

BIGTREETECH-TFT24-V1.1 copied to clipboard

Touchscreen connection with SKR e3 Mini v1.2

1

I can't seem to figure out the touchscreen function with SKR e3 mini with serial connection. I always get "no connection to printer"

scheini79

Would it be possible to add a filament out option to the TFT24 by allowing an unused pin to be defined as a filament out sensor option like the TFT35,...

andyspoo

When in text mode, and the screen receives a filament out message from marlin, the screen gives option to unload, load and resume (kind of, but it's a bit clunky/unreliable)....

andyspoo

[12864] Can't upload FW to RAMPS 1.4 when EXP2 RST pin is connected

1

Hi i have problem with firmware upload when EXP2 is connected to board. Problem is caused by the RST pin. Any way how to flash FW without EXP2 unplugging? When...

Ceda

Octoprint with TFT not working

4

I try to send printing from octoprint with the TFT mode and is not working. Do nothing. But with the LCD mode they work well.

manukieli

If I go to level corners in marlin mode bltouch and nozzle is on the bed if I switch to the bigtreetech touch interface and level corners both are off...

Oslow1

All low Error message but screen works fine

2

I've recently installed the tft24 to my skr 1.4 turbo with TMC2209 and configured the firmware according to my needs but there is a little bug that annoys me more...

w1n5t0ngr

Lack of schematic diagram

4

Please upload schematic diagram.

ArturNadolski

Random white screen on TFT24

1

I have a Tft24 and after using it for about a month with an skr 1.3, after some minutes the screen turns white. I tried to upgrade the firmware but...

ghost

Marlin 2.0 configuration in touch mode

1

I want to use the serial touch mode of the display together with my SKR 1.3 How do I configure Marlin to get that working ? I do not want...

mikeww1