benbojangles

Is it possible tohave a drop down selector in V2.7.0?

gpredict integration would be so good :)

@Aang23 Take a look at rigctl: https://www.mankier.com/1/rigctl there are already some server examples setup which can then be connected to gpredict https://www.mankier.com/1/rigctl#Examples usually, the rigctl server will have localhost: port...

tried either: `sudo port install volk` or `brew install volk` ?

I know Noaa has audio so can use one of these to output audio during Noaa cronjob: https://www.ebay.co.uk/itm/0-96-OLED-Music-Spectrum-Display-Analyzer-Audio-Level-Indicator-Rhythm-VU-Meter/174217550928?hash=item28902cdc50:g:BMwAAOSwzGFgMnJ8 But how to do for Meteor if not make audio?

"@aakashpolra have you tried https://github.com/ThomHPL/BaseI6_updater and FW from rcgroups? benb0jangles is updating the GUI updater just time to time." -I'm actually in agreement with using this updater for future firmware...

There is discussion to change firmware to support telemetry by Ardupilot, cleanflight, and custom. Ardupilot will have to use Mavlink to iBus convertor, cleanflight has ibus support, custom is ibus....

I saw that BT, you can make your own too :) Does it work with APM telemetry? What receiver are you using to passthrough data?

I hear that for multiple receivers, you have to copy the model to another free model location, and bind receiver #2. each model location only supports one receiver. I _think_...

https://github.com/benb0jangles/FlySky-i6-Mod-/tree/master/Mod_i6_Alt_Recovery_Programmer_V1_0