benbojangles

oh cool were in. I had to change to software system reset from hardware system reset in settings. 

here's the original firmware: [FY_Q7_RX_Original_Firmware.zip](https://github.com/Cleric-K/FlySkyRxFirmwareRssiMod/files/7123461/FY_Q7_RX_Original_Firmware.zip)

do you thik it can be changed to pair with the flysky i6 somehow? I probably shouldn't try flashing with ia10b firmware until the original bin file has been looked...

I think it only binds to the flying fy x8 transmitter, it looks like a flysky i6 

Yes it has telemetry, the receiver directly connects to tx and rx on an APM board. There seems to be two versions of FY-Q7-RX receiver, one with six signal pins:...

Also seems accroding to rcgroups comment that binding plug of receiver goes not to pin B/Vcc like normal receivers, but to port marked Tx: ![Screen Shot 2021-09-09 at 11 14...

more internet searches and it seems there are also 2 versions of flysky ia10 receiver, 1)ia10 and 2)ia10b: ia10:  ia10b:  Seems the FY-Q7-RX is more similar to ia10...

more data on ia10 receiver:    

I managed to find photos of fs-ia10 receiver pcb:  

FY-Q7-RX and Flysky ia10 receiver have identical pcb: