becketps

unfortunately both methods does not work. On the starting skript I added the -e HOST_ARCH=arm64 and executed it. But it did not pull everything and does not continue. The second...

Ok can you inform me when you have something for the Jetson, Is it the same Situation on the [AI Accelerator](https://www.universal-robots.com/de/produkte/ai-accelerator/) which has this jetson included? Is there a possiblity...

Thanks for the reply, do you have a hint how to set it up? I struggle in the moment with the connection between the jetson and the pc. kind regards

Thanks for the hint but I connected the Jetson via Ethernetcable to the PC. On the PC I did the process you mention above. Then I tried to reach the...

> Thank you for reaching out to us. We will review out tutorial accordingly. > > As a workaround, you can always try using the lowlatency kernel with which we've...

I tested the command at this page after starting the ros2 launch ur_robot_driver sucessfully with the rviz visualisiation: https://docs.universal-robots.com/Universal_Robots_ROS_Documentation/doc/ur_robot_driver/ur_robot_driver/doc/usage/move.html#move-the-robot ros2 launch ur_robot_driver test_scaled_joint_trajectory_controller.launch.py That gave me the following output. How...

At first I confgured the external control like in the description with the IP-Adress of the robot and also the Hostname as the IP-Adress of the robot. When I at...

Hi, I think the only question is how the dockerfile must look like to integrate the sdk

I think so far not. Do you also provide cameras to test it with half transparent horses? A lot of cameras are only able to record it 40cm away and...

Yes thanks. But that means that I need other sensoric to see something in the near and see and feel the deformation of hoses . Do you have there ideas...