avafinger
avafinger
There is a new eMMC version. The firmware will be updated to fix this. Can you check if eth0 and wlan0 works?
@azrin1972 Good to know, thanks. BPI updated the eMMC version on their new HW revision and so i need to update the code for the new version. That can take...
@azrin1972 Can you please try: https://github.com/avafinger/bananapi-m64-kodi/releases/tag/v1.0 **credentials:** ubuntu / ubuntu Flash SD card first, boot and then Flash eMMC **You may need to update the boot order of the device...
Yes, should work nicely.
Can you tell me which HW revision is your new board?
Can you try this one?: https://github.com/avafinger/bananapi-m64-kodi I can give instructions to flash to the eMMC. Burn the SD card with 5.2, see if it boots from SD card, then upgrade...
@azrin1972 Can you please try with this Image https://github.com/avafinger/bananapi-m64-kodi and right after you burn the SD CARD you write the new u-boot for the HW revision 1.2 and tell me...
@azrin1972 Please, don't use a USB hub, only the mouse in one usb slot and a keyboard in the other usb slot.
Initial Image to Burn: https://github.com/avafinger/bananapi-m64-kodi/releases/tag/v1.0 u-boot for the board hw revision 1.2: Image to Burn: https://github.com/avafinger/bananapi-m64-kodi/releases/tag/v1.3 **Edited**
If i recall correctly you need to have the previous (first one: https://mega.nz/#F!wXwlRRZR!0BCmUo2F2hg7rG4Ax69bkw) 4.4 sd card OS image and then upgrade to 4.4 **ZRAM+LZ4**. U-boot environment is different. i think...