avafinger
avafinger
Interesting read: https://patchwork.kernel.org/patch/9265455/
Hmm, ok. The board dropped to a u-boot command line, for whatever reason it is sensing ENTER on serial console debug and drops to u-boot shell. I can see by...
Almost there! For some reason the board rebooted. I think you should review how you are powering the board or placing the board on a static surface. Here is the...
I suspect there is two different batch of boards released. sounds like the culprit is u-boot in this case. You could try this: - Write the (raspian) u-boot or the...
@jwrz Please, try this on the SD CARD image (from your HOST PC) and report back if anything changed: ``` mkdir -p m64_test cd m64_test wget https://github.com/avafinger/a64_bin/raw/master/ub-m64-sdcard-test.bin sudo dd if=./ub-m64-sdcard-test.bin...
Kernel 4.11 cat /sys/devices/system/cpu/cpu0/topology/physical_package_id 0 Will look into it when possible.
Please, provide more info about your LCD, model, how you did install it. Are you able to grab the boot log? Can you see if you type: ubuntu after 30/50...
Can you tell if LCD gets the backlight ON or turns ON with the new DTB for the LCD? On Tue, Feb 28, 2017 at 6:50 PM, Jody wrote: >...
Ok, i will check the DTB again, maybe you need the u-boot with the LCD changes also. will see what i can do. On Tue, Feb 28, 2017 at 7:14...
please, try with this and report back if it works: https://github.com/avafinger/bpi-m64-firmware/raw/master/a64-2GB_LCD_TOUCH_OK.dtb