avafinger

It is fine. I will see if i can do something with 5.4, but there are lots of changes on 5.4 so it may take days to come up with...

I have updated the kernel to 5.3.9 based on xunlong and hopefully, DHCP and HDMI should work. at least works here. There are 3 "speedbin" on H6, say fast, normal...

Ubuntu 18.04 OS Image is here: https://github.com/avafinger/orangepi-h6-ubuntu-base-minimal/releases/tag/v1.24

> If I try to recreate sd card with your script, in old version (with format_sd_mainline) it fails, and also fails with this new version v.124 It failed to create...

today I built Kernel 5.4.2 , i have CPU Temp but no Cpu Freq. I have hdmi-sound available but can't play anything on this.. ``` ubuntu@opi-h6:~$ uname -ra Linux opi-h6...

Some progress with Kernel 5.4.2. https://github.com/avafinger/orangepi-h6-ubuntu-base-minimal/blob/master/README.md#mainline-kernel-542-experimental * DVFS works (a bit slow) * hdmi-sound works * thermal readout works Board still runs a bit hotter than 5.1.y , 46C idle...

> it says that I lack a kernel module but in your previous version it works ok. Compare both kernel.config to find out which module is missing Kernel 5.4.3 works....

Here: https://github.com/avafinger/orangepi-h6-ubuntu-base-minimal/releases/tag/v1.25 I would suggest you have a second sd card as a backup, so you don't lose any work and can compare both versions.

Install this package: https://github.com/avafinger/htop_2.2.2/releases/tag/v1.1

Kernel is the issue. It is missing the Temp policy configuration. I will look into it. Unfortunately, wlan support is also missing.