Tag v1.9 not booting, black screen

[pinighg]

Hi Avafinger, thank you for your great work! I registered in GitHub just for asking you a few questions:

I tried to boot with instructions in v1.9 but in a 16GB sd card and Orange pi one plus does not boot properly (screen does not start) and perhaps board is reseting continuously. It is mandatory to have 8GB sd?

Then I tried wit v.1.10 because I thought that was a problem of 16GB sd instead of being 8GB, so I followed your instructions for format and flash sdcard and I had same results.

Finally I get another 2GB SD and did same procedure, in both cases it finishes flashing ok, but same results when I put in Orangepi.

I checked md5sum of files and are ok.

When SBC starts the light flashes red and yellow instantly and then stops and turn on led of Ethernet. Several seconds ago same thing happens.

I installed a Virtuabox with ubuntu 18.04 to make all procedure again and same results.

Before I found your work I installed last Armbian in same sd card and it works ok (but no sound), also I installed kernel 4.9 version from Orange Pi's official web, and then build script and I added new rootfs with debootstrapped Debian and it works ok (but I can't change resolution, 1920x1080 is fixed and changes in DTB files are not applied).

So after all my mistakes will be great if you can help me to make it work, I'm a newbie on this.

Thank you.