arkypita
arkypita
PS. if you want to edit the button to work, using the workaround I suggest you, here is the code you should write; `M3 S10 F1000` `M3S[$303/100]F1000` can't work
> > PS. if you want to edit the button to work, using the workaround I suggest you, here is the code you should write; > > `M3 S10 F1000`...
> > > > PS. if you want to edit the button to work, using the workaround I suggest you, here is the code you should write; > > >...
no, custom button use math evaluation (they can compute formula, like "width + 5") but in this case the formula $30*3 is missing of the $30 variable, and so turns...
If you want you can try this pre-release and tell me if it works for you: https://github.com/arkypita/LaserGRBL/releases/download/v4.9.5/install.exe
Hello, this improvement has been in the roadmap for a lot of time. An attempt was made to implement it but the result was not satisfactory because, given the way...
Tip: if you mount the object to be marked "in axis" with the motor (like on a lathe) you have the problem you are talking about, but if the motor...
Could you share a sample file?
I have tested your file, both the .svg version and the .nc version with gcode. In both cases LaserGRBL compute and execute framing correctly. If the problem is when using...
The machine is not responding, LaserGRBL close the connection due to timeout (10s) Are you sure you are using the right baudrate? I see 9600, but most machine use 115200