arkypita

Just remove TXT extension and leave NC

I have tested both files on my Sculpfun S10 and they both came out perfect. This confirm that issue is not in LaserGRBL or file, but in your machine. I...

Thanks for the report, is it something that happens always or sporadically? The problem has already been reported to me, but it seems to be a problem with the Microsoft...

The message "handle broken ok" detects that there is a disturbance on the communication between the machine and your PC. The positions are established in LaserGRBL on the basis of...

Based on what I see on their website http://www.voidmicro.com/Manual/OMachine-en.html?page_download look very probable that they use a modified version of grbl firmware. Are you sure you switch to the grbl firmware?...

Each time LaserGRBL send a gcode line, the controller reply with "ok". When those ok's are not recogized because they are blended inside some other message, LaserGRBL detect this situation...

Can you copy/upload what is in your logfile? You can see logfile from LaserGRBL menu ?, Open session log. You can also record all the communication between LaserGRBL and engraver...

You are a 77YO novice able to zip a logfile and upload to github. better then 99.9% of 70s Looking at logfile I clearly see the issue. Your engraver is...

Ps. It is really easy to me to change LaserGRBL code to handle this non-standard status message. I can release a test version in few time

The homing button send "$H" command. There is no way to change it because it is not needed to change. The homing procedure is totally managed by the controller board.