anjok
anjok
When I installed a sample sketch onto a new Nano - with otto.init(true), apparently there was garbage in the EEPROM, which resulted in very tense and weird leg positions. The...
Several times now I homed the OAT during the day prior to putting it outside and I had it going off the rails in RA. The RA steps were fine...
I had some issues with the EEPROM store and wanted to try the dummy store to double.check. Unfortunately it didn't compile. Here's what I did to get it to run....
When I set the speed/accel of the new stepper lib too high (I used 16.0 for both), MHRR3 doesn't find the magnet anymore and subsequently goes off the rails on...
**Is your feature request related to a problem? Please describe.** En-/Disabling Mirror Lock used to be supported, but is apparently commented out because it didn't work with some models. Also...
In astrophotography, there are calibration frames of various types, in particular darks, where you cover the lens and takes some shots. The resulting image(s) will show only dead/hot pixels. From...