Andrew Infantado

I believe that it should be a recommended install when you first set up the Deck. For example, maybe put it as the first item on the carousel when you...

I'm not sure if this is possible on Linux, but using hardware-backed encryption with automatic unlocking using the TPM, just like on Windows, can enable fully transparent disk encryption with...

However, I'd argue that the user's experience should not change when encryption is enabled or not. Considering that SteamOS's files used for large parts of the user interface (like the...

Done some investigating, and a quick 15 minute print shows the M73 info very soon after starting. Could it be that the print (which is 13 hours long) is too...

- I have restarted OctoPrint and the whole machine several times as a part of routine testing on my end. - Yes, the problem still occurs when beginning a 14...

Apologies for the late reply. Been recovering from a lack of sleep recently. - Yes, I can confirm that the issue is not present on short prints. - This issue...

Here are the requested logs along with a couple pictures. [octoprint.log](https://github.com/cesarvandevelde/OctoPrint-M73Progress/files/6943297/octoprint.log) [plugin_m73progress.log](https://github.com/cesarvandevelde/OctoPrint-M73Progress/files/6943298/plugin_m73progress.log) 

It seems to be quite inconsistent. On this 17 hour print, longer than the other file, it shown the time remaining on the printer display within 10 minutes. 

No worries! Life happens. I have disabled *all* third-party plugins minus M73 Progress and PrintTimeGenius, and the issue can still be reproduced. Here's a copy of the log files. [octoprint.log](https://github.com/cesarvandevelde/OctoPrint-M73Progress/files/6982748/octoprint.log)...

Alright. I'm disabling PrintTimeGenius and will get back to you in an hour.