Andrew Leech

I have tried the CLA signing process above a couple of times but it' still marked as not-signed. I agree to the CLA.

Hi, that's interesting. I don't have any zones myself so have never really known how they're supposed to work other than the diligent reporting and debugging by a few people...

@robert-hh I've attempted to get my WeAct board going with USB but it's not working yet - shared here for reference however. To compare, here's my modified to enable USB...

> I managed to set the clock using the 16Mhz crystal by setting the divider=2, multiply=6. It seems that this combination cannot be set using the smart configurator. Oh interesting,...

Oh geez the clock circuits in this MCU are rather confusing and limiting.   So it says it accepts an internal xtal up to 20mhz, at 5v. Input voltage...

I've pushed what's hopefully a cleaner version of the code, though I still wasn't able to get USB working. I say cleaner in that I think it's not truncated, but...

Yes I too checked divided xtal on clkout and it was accurate. I initially tried HOCO for both as that's how the W1 is configured where I've got USB working!...

I tested a tinyusb example directly on my weact board and couldn't make that work either. There are two RA4M1 board profiles there: ``` bash anl@STEP:~/tinyusb/examples/device/cdc_msc$ make BOARD=ra4m1_ek anl@STEP:~/tinyusb/examples/device/cdc_msc$ make...

Oh, ignore that last message. I just found the uno_r4 bsp had an updated linker to make space for the arduino bootloader. I got rid of that, recompiled, flash, ta-da...

The othe official EK boards don't have real USB connected, at least not the ones I've checked. They've got 2 USB conenctors... one goes direct to a Jlink, the other...