andreasloe

Sorry for the long delay. I am using `Linux raspCam 5.10.92-v7+ #1514 SMP Mon Jan 17 17:36:39 GMT 2022 armv7l` `Raspberry Pi Zero 2 W Rev 1.0` `PRETTY_NAME="Raspbian GNU/Linux 11...

The same on 11.2.

I think this can be closed due to the webpage that is available for flashing.

Maybe this is a solution to the problem: http://html2canvas.hertzen.com/ It renders on the client side.

Unfortunately, I cannot check that at the moment because I am running a CUL (and the tools have not arrived yet). But I hope that the signal can be received...

Wonderful, thank you. Everything worked out as outlined! Case can be closed.

I do not know what the issue above was but I am getting the following error `sudo make` ``` make ARCH=arm CROSS_COMPILE= -C /lib/modules/4.9.35-v7+/build M=/usr/src/rtl8812AU_8821AU_linux modules make[1]: Entering directory '/usr/src/linux-4.9.35'...

I think I know which mistake I made. I forgot to ` sudo apt-get install raspberrypi-kernel-headers` Now, the first steps go through, but the last step gives ``` sudo modprobe...

I am sorry to bother you all but since I am trying this now for hours it seems I found a solution: [https://askubuntu.com/questions/861717/how-to-install-d-link-dwa-172-id-20013318-driver](https://askubuntu.com/questions/861717/how-to-install-d-link-dwa-172-id-20013318-driver)

Unfortunatively, this does not work for me. I installed pyobjc, updated textmate (and my MacOS as well) and get the following error messages if I run LaTeX (cmd-R) `Traceback (most...