Andreas Skomski
Andreas Skomski
Hey! You can try updating your printer drivers: https://www.peachyphotos.com/blog/stories/building-modern-gutenprint/ Also make sure permissions are fine for the Webserver User: ``` sudo gpasswd -a www-data lp sudo gpasswd -a www-data lpadmin...
Could you please try latest development version from https://github.com/andi34/photobooth If you still have issues please open a bug report with additional information in my fork.
Forgot to mention: Clean installation required. The installer expects user `pi` with membership of group `pi` on some parts.
https://github.com/andi34/photobooth/pull/400
You can use a Rotary Controller (e.g. ky-040 for about 1-2€) , implemented here: https://github.com/andi34/photobooth Documentation can be found at: https://github.com/andi34/photobooth/blob/wiki/FAQ.md#remotebuzzer-hardware-button-feature-using-gpio-connected-hardware-raspberry-pi-only
Clean installation is recommended since a lot of changes have been made.
https://github.com/andi34/photobooth/commit/dd285e4255b144b82f12cf285da04465c5c10edf Gives you the possibility to choose between white, grey and black.
To choose any color you like: https://github.com/andi34/photobooth/commit/530a5f223349b57a9ee24c7665973c708f2fc85c
Remotebuzzer Implementation was added on my fork already: https://github.com/andi34/photobooth/releases
Yes. https://github.com/andi34/photobooth/wiki/FAQ#can-i-use-hardware-button-on-my-raspberry-pi-to-take-a-picture