aldolo

NodeMCU v1 clone also. i'm going to investigate a fake flash chip.

after more troubleshouting turned out that my clone nodemcu board does not complain for qio mode, but the resulting flash does not work at all. qout mode, on the other...

make is ok now. now disk write fails (99%) at the default address 3932160. Writing A disk (alone) to 3915776 everything is fine but i'm no more able to connect...

same kind of board but without any output in the console. using a s1 module (1m flash) and not "burning" any disk i was at least granted with a message...

The 4M board get all the code but can't drive the serial port, the 1M board can drive the serial port but can't fit all the code. In both cases...

it turned out that the only supported programming mode was dout for the 4m board and dio for the 1m board. despite failing most of the time, the dout programming...

@ is an unfortunare char for some keyb. I can suggest not to use it at all and make doubletap to autocomplete the word on the left

yaaic could be useful to build other client. i really like the idea of a floating (standup library) client but i don't wont to rebuild all the communication part.

i'm facing the same problem but still i've not found a solution by myself. rotating the screen do not update screen width/height so i can not wander a window around....

tankyou. i'vecopied it in getlayoutparams so w/h are always up to date