Ajay

@vik748 Appreciate your suggestions and completely agree with you. I will communicate with the FLIR once regarding network configuration.

@orange2xiaoyu As mentioned by @vik748 The launch file overrides the settings in params.yaml. so set the binning, color and soft_fps in the launch file. launch/acquisition.launch ``` ``` Just change above...

@orange2xiaoyu Try commenting below the line in the source `spinnaker_sdk_camera_driver/src/camera.cpp` and try again. `ROS_ASSERT_MSG(frameID_ == 0 ,"First frame ID was not zero! Might cause sync issues later..."); `

@orange2xiaoyu In my case, ASSERTION failed error messaged caused to due to line 59, in the campera.cpp and commenting that resolved my issue. Please check your error message cause, or...

@acarrillo I managed to overcome this issue as mentioned above. Please share the actual error message that appears in your camera. There could be another reason for that cause.

@mithundiddi Thanks for your response. We are using an ethernet camera (GigE) and connected to Linux machine using LAN not USB. And rest of your understanding is clear. Few of...

Hello @scott81321, Thanks for highlighting this important issue here. Currently, i also tested with the code provided sample data in the .p (pickle format) and everything works fine. Would like...

Hello @mightyhao @scott81321 are you able to test working for this repo code with your own data ! Would you please share some of your experience on that ! I...

@scott81321 Thank you so much for your detailed response indeed it makes me understand more clearly. By any chance is it possible to look at your script for reading data...

@Magic-wei After running the command still getting error like the below;  Any suggestions, please !! Python Version: 3.9 Ubuntu 18.04 ROS Melodic